Nano-Formulation Based Intravesical Drug Delivery Systems: An Overview of Versatile Approaches to Improve Urinary Bladder Diseases.

Intravesical drug delivery is a direct drug delivery approach for the treatment of various bladder diseases. The human urinary bladder has distinctive anatomy, making it an effective barrier against any toxic agent seeking entry into the bloodstream. This screening function of the bladder derives from the structure of the urothelium, which acts as a semi-permeable barrier. However, various diseases related to the urinary bladder, such as hyperactive bladder syndrome, interstitial cystitis, cancer, urinary obstructions, or urinary tract infections, can alter the bladder's natural function. Consequently, the intravesical route of drug delivery can effectively treat such diseases as it offers site-specific drug action with minimum side effects. Intravesical drug delivery is the direct instillation of medicinal drugs into the urinary bladder via a urethral catheter. However, there are some limitations to this method of drug delivery, including the risk of washout of the therapeutic agents with frequent urination. Moreover, due to the limited permeability of the urinary bladder walls, the therapeutic agents are diluted before the process of permeation, and consequently, their efficiency is compromised. Therefore, various types of nanomaterial-based delivery systems are being employed in intravesical drug delivery to enhance the drug penetration and retention at the targeted site. This review article covers the various nanomaterials used for intravesical drug delivery and future aspects of these nanomaterials for intravesical drug delivery.

In silico, in vivo enzymatic, non-enzymatic toxicity and antioxidant activity of a heterocyclic compound: 5-Benzyl -1, 3, 4-oxadiazole-2-thiol, a potential drug candidate.

The present study aimed to investigate the enzymetic, non-enzymetic toxicity and antioxidant potential of a drug candidate 5-Benzyl-1,3,4-Oxadiazole-2-Thiol(OXPA) using computational tools and in vivo models. The binding pattern of it, with different toxicity/oxidative enzymes was predicted using software pkCSM, Protox- II, LAZAR, Mcule 1-Click Docking 3D-Ligand binding Site and best score obtained used as an evaluating criterion. After acute oral toxicity, in vivo. antioxidant and hepato protective activity was investigated on male wistar rats, segregated into four groups as control (NS), toxic (INH-RIF), standard (Silymerin) and sample (OXPA, 100mg/Kg) for 21days. Level of antioxidant enzymes / histopathology and serum biochemical parameters in liver and blood of treated rats was assessed by using scientific tools. In silico study reveal no profound toxicity parameters however, LD50 found to be 560mg/Kg while in vivo study declared it safe till 1000mg/Kg, as having no toxicity symptoms. Molecular interaction score with GTH reductase, s-transferase and significant in vivo antioxidant effect on catalase, SOD, TBARS enzymes and histopathological assessment, declare OXPA a good antioxidant having significant (P< 0.05) hepato protective activity. Results of in silico, in vivo studies declare the propensity of 5-Benzyl-1, 3, 4-oxadiazole-2-thiol as potential antioxidant, for further investigations as a drug.

Development and characterization of niosomal gel of fusidic acid: in-vitro and ex-vivo approaches.

Niosomes are multilamellar vesicles that efficiently deliver active substance into skin systemic circulation or skin layers. They are used in topical drug delivery system to enhance the skin permeation of active substance. So, the prime objective of this study was to develop a niosomal gel of fusidic acid to increase its skin permeation. Different formulations of niosomes of fusidic acid were designed by varying the cholesterol to surfactant ratio. Formulations containing fusidic acid, cholesterol, dihexadecyl pyridinium chloride, Span 60, or Tween 60 were prepared by thin film hydration method in rotary evaporator. The thin film formed in rotary flask was hydrated by phosphate buffer saline of pH 7.2. The niosomes formed were characterized through entrapment efficiency, size, polydispersity index (PDI), and zeta potential. The S3 formulation containing span 60 showed the highest entrapment efficiency (EE) of niosomes, so it was incorporated into Carbopol gel. Determination of pH, spreadability, rheological, and ex vivo permeation studies was conducted of niosomal gel. The results of ex vivo permeation studies showed high permeation of fusidic acid when gel was applied to an albino rat skin. According to the results and previous studies of niosomes, it can be concluded that niosomes enhanced the permeation of fusidic acid through the skin.

Dose Tailoring of Vancomycin Through Population Pharmacokinetic Modeling Among Surgical Patients in Pakistan.

Background: Vancomycin is a narrow therapeutic agent, and it is necessary to optimize the dose to achieve safe therapeutic outcomes. The purpose of this study was to identify the significant covariates for vancomycin clearance and to optimize the dose among surgical patients in Pakistan. Methods: Plasma concentration data of 176 samples collected from 58 surgical patients treated with vancomycin were used in this study. A population pharmacokinetic model was developed on NONMEM® using plasma concentration-time data. The effect of all available covariates was evaluated on the pharmacokinetic parameters of vancomycin by stepwise covariate modeling. The final model was evaluated using bootstrap, goodness-of-fit plots, and visual predictive checks. Results: The pharmacokinetics of vancomycin followed a one-compartment model with first-order elimination. The vancomycin clearance (CL) and volume of distribution (Vd) were 2.45 L/h and 22.6 l, respectively. Vancomycin CL was influenced by creatinine clearance (CRCL) and body weight of the patients; however, no covariate was significant for its effect on the volume of distribution. Dose tailoring was performed by simulating dosage regimens at a steady state based on the CRCL of the patients. The tailored doses were 400, 600, 800, and 1,000 mg for patients with a CRCL of 20, 60, 100, and 140 ml/min, respectively. Conclusion: Vancomycin CL is influenced by CRCL and body weight of the patient. This model can be helpful for the dose tailoring of vancomycin based on renal status in Pakistani patients.

Linking traditional anti-ulcer use of rhizomes of Bergenia ciliata (Haw.) to its anti-Helicobacter pylori constituents.

The rhizomes of Bergenia ciliata (B. ciliata, Family: Saxifragaceae) are widely used for treating gastric ulcers in folk medicine in Asia. It was hypothesized that anti-ulcer activity of B. ciliata is due to its anti-Helicobacter pylori (H. pylori) activity. The anti-H. pylori activity was investigated on six clinical bacterial isolates using agar well-diffusion and broth micro-dilution methods. The anti-H. pylori activity of amoxicillin (standard) was the highest (Zone of inhibition; ZI = 25 mm, minimum inhibitory concentration; MIC=0.125 µg/µL) whereas among all the extracts of the rhizomes, methanol extract showed the highest activity (ZI = 16 mm, MIC = 12.50 µg/µL). Bioassay guided isolation of methanol extract using chromatographic and crystallization techniques isolated bergenin (ZI = 21mm, MIC = 0.391µg/µL) as constituent responsible for anti-H. pylori activity. The present study describes for the first time anti-H. pylori activity and possible mechanism of anti-ulcer properties of rhizomes of B. ciliata.

Metabolomics and marker-based stability studies of methanol extract of seeds of Syzygium cumini L.

Though, herbal medicines are prone to deterioration upon storage due to their complex nature, but less attention has been paid to investigating stability of such products to assign shelf-life. Therefore, the present study aimed to assess the accelerated stability of methanolic extract of seeds of Syzygium cumini. The extract was kept at three different storage conditions (30oC/60% RH, 40oC/75% RH and 60oC/85% RH) for a period of 6 months. The samples withdrawn at 0 (before starting the study), 1, 2, 3, 4 and 6 months were analyzed to get UV-Visible metabolomics fingerprints and determine caffeic acid contents using RP-HPLC. The comparison of metabolomics fingerprints indicated that the extract was stable for 1 month at all the three storage conditions. However, caffeic acid contents were found to be intact for a longer period of time. Following the zero order degradation, caffeic acid was predicted to be stable for more than 3 years, if kept at 25oC. The results of the present study indicate that metabolomes of methanol extract of seeds of Syzygium cumini change very fast, suggesting the development of stable formulations.

Chemical and pharmacological comparison of modern and traditional dosage forms of Joshanda.

Recently, a traditional remedy (Joshanda) has been replaced largely by modern ready-to-use dosage forms, which have not been compared to the original remedy. Therefore, the present study aimed to compare a number of modern dosage forms with traditional remedy. Seven brands, 3 batches each, were compared with a Lab-made formulation with reference to analytical (proximate analyses, spectroscopic and chromatographic metabolomes) and pharmacological profiles (anti-inflammatory and antibacterial activities). Chemical and pharmacological differences were found between Lab-made Joshanda and modern dosage forms. Such variations were also found within the brands and batches of modern formulations (p < 0.05). The Lab-made Joshanda showed significantly higher pharmacological activities as compared to modern brands (p ). The results of the present study indicate that modern dosage forms are unstandardised and less effective than the traditional remedy. Characteristic profiles obtained from Lab-made Joshanda may be used as reference to produce comparable dosage forms.

Impact of Particle-Size Reduction on the Solubility and Antidiabetic Activity of Extracts of Leaves of Vinca rosea.

OBJECTIVES: The present study aimed to enhance the aqueous solubility of methanol extract of leaves of Vinca rosea (family: Apocynaceae) by particle-size reduction using milling and to evaluate its antidiabetic activity. MATERIALS AND METHODS: The methanol extract (ME) was micronized using a vibratory ball mill, operated at a vibratory speed of 15 Hz for 60 min at room temperature, and the resulting extract micronized ME (MME) was investigated to determine particle size, solubility, UV/visible profile, and in vitro antidiabetic activity. RESULTS: The average particle size of MME was 0.753±0.227 µm, which was less than half of that of the ME (2.007±0.965 µm). The solubility of MME was greater than that of the ME. MME exhibited 65.63%, 18.0%, and 96.87% higher antidiabetic activity in the glucose uptake by the yeast cells method, hemoglobin glycosylation assay, and the alpha amylase inhibition assay, respectively (p<0.05). CONCLUSION: The results of the present study indicate that micronization effectively enhanced the aqueous solubility and antidiabetic activity of methanol extract of leaves of Vinca rosea.

Development and validation of a stability-indicating RP-HPLC-FLD method for determination of 5-[(4-chlorophenoxy) methyl]-1, 3, 4-oxadiazole-2-thiol; A novel drug candidate.

The present study describes the development and validation of a simple high performance liquid chromatographic method for the determination of a novel drug candidate, 5-[(4-chlorophenoxy) methyl]-1, 3, 4-oxadiazole-2-thiol. The stability-indicating capacity of the method was evaluated by subjecting the compound's solution to hydrolytic, oxidative, photolytic, transition metal- and thermal- stress. The chromatographic separation was achieved over a C18 column (Promosil, 5 µm, 4.60 × 250 mm), maintained at 25°C, using an isocratic mobile phase comprising a mixture of acetonitrile and acidified water of pH 2.67 (1:1, v/v), at a flow rate of 1.00 mL/min and detection using a fluorescent light detector (excitation at 250 nm and emission at 410 nm). The Beer's law was followed over the concentration range 2.50-50.00 µg/ml. The recovery (98.56-100.19%, SD <5%), intraday accuracy and precision (97.31-100.81%, RSD <5%), inter-day accuracy and precision (97.50-100.75%, RSD <5%) and intermediate accuracy and precision (98.10-99.91%, RSD <5%) indicated that the method was reliable, repeatable, reproducible and rugged. The resolution and selectivity factors of the compound's peak from the nearest resolving peak, particularly in case of dry heat and copper metal stress, were found to be greater than 2 and 1, respectively, which indicated specificity and selectivity. The compound was extensively decomposed in alkaline-hydrolytic, oxidative, metal- and dry heat- stress. However, the compound in acidic and neutral conditions was resistant to photolysis. The results of the present study indicate that the developed method is specific, selective, sensitive and suitable, hence, may be used for quality control, stability testing and preformulation studies.

Single Unit Cell Bismuth Tungstate Layers Realizing Robust Solar CO2 Reduction to Methanol.

Solar CO2 reduction into hydrocarbons helps to solve the global warming and energy crisis. However, conventional semiconductors usually suffer from low photoactivity and poor photostability. Here, atomically-thin oxide-based semiconductors are proposed as excellent platforms to overcome this drawback. As a prototype, single-unit-cell Bi2WO6 layers are first synthesized by virtue of a lamellar Bi-oleate intermediate. The single-unit-cell thickness allows 3-times larger CO2 adsorption capacity and higher photoabsorption than bulk Bi2WO6. Also, the increased conductivity, verified by density functional theory calculations and temperature-dependent resistivities, favors fast carrier transport. The carrier lifetime increased from 14.7 to 83.2 ns, revealed by time-resolved fluorescence spectroscopy, which accounts for the improved electron-hole separation efficacy. As a result, the single-unit-cell Bi2WO6 layers achieve a methanol formation rate of 75 µmol g(-1) h(-1), 125-times higher than that of bulk Bi2WO6. The catalytic activity of the single-unit-cell layers proceeds without deactivation even after 2 days. This work will shed light on designing efficient and robust photoreduction CO2 catalysts.

Metallic single-unit-cell orthorhombic cobalt diselenide atomic layers: robust water-electrolysis catalysts.

The bottleneck in water electrolysis lies in the kinetically sluggish oxygen evolution reaction (OER). Herein, conceptually new metallic non-metal atomic layers are proposed to overcome this drawback. Metallic single-unit-cell CoSe2 sheets with an orthorhombic phase are synthesized by thermally exfoliating a lamellar CoSe2 -DETA hybrid. The metallic character of orthorhombic CoSe2 atomic layers, verified by DFT calculations and temperature-dependent resistivities, allows fast oxygen evolution kinetics with a lowered overpotential of 0.27 V. The single-unit-cell thickness means 66.7 % of the Co(2+) ions are exposed on the surface and serve as the catalytically active sites. The lowered Co(2+) coordination number down to 1.3 and 2.6, gives a lower Tafel slope of 64 mV dec(-1) and higher turnover frequency of 745 h(-1) . Thus, the single-unit-cell CoSe2 sheets have around 2 and 4.5 times higher catalytic activity compared with the lamellar CoSe2 -DETA hybrid and bulk CoSe2 .